The hottest research view on the investment market

Research on the investment market of China's plastic products industry in 2012

China's plastic products industry is still growing rapidly with the steady growth of the national macro-economy. However, there is still a certain gap in the development of domestic plastic products compared with developed countries, but the processing technology and material selection are diverse, and some aspects of production and sales are not very perfect. Therefore, accelerating the development of plastic products industry is an urgent requirement of China's economic and social development. With the rapid development of China's economy, this requirement is more significant. In Guangdong, Zhejiang, Jiangsu and other provinces of China, the plastic products industry has developed rapidly, which has brought considerable economic effects to these regions. With the rapid development of plastic products industry, it also puts forward higher requirements for the development of the industry. We should not only pay attention to independent innovation and improve product quality, but also save energy, reduce consumption, reduce costs and pay attention to environmental protection

the investment strategy and in-depth research and consultation report of China's plastic products industry in shows that China's plastic enterprises have low industrial concentration, scattered productivity, low degree of specialized production and low rate of deep processing. Instead of carrying out drastic reform, transformation, merger, reorganization, and accelerating the adjustment of industrial structure or the formation of China's three major enterprise groups, China's plastics industry has implemented more extensive management of the plastics industry, forming a situation in which factories fight for themselves, villages fight for themselves, and large-scale products. The investment in basic equipment of local enterprises is overheated, and the production of low-value products, such as PVC, has increased irrationally. At present, the annual output of Jinshan petrochemical, China's largest plastic enterprise, only accounts for 7% of the national total. 86%。 The concentration of plastic enterprises is too low, which is also the main reason for the excessive production of similar plastic products in China, the overproduction of low-value products and fierce competition, resulting in the low profit operation of industrial enterprises. At present, PP and PE are the main plastic varieties in China, and common materials account for a large proportion of products. The excessive concentration of this product leads to excessive competition

Market Research on the operation of the plastic products industry in 2012

I. technological upgrading will become the key to the development of the plastic industry

China's plastic products imports in 2011 184. 80000 tons, with an import value of 180. US $6.6 billion; Export volume 1304. 70000 tons, with an export volume of 393. US $0.9 billion. The average unit price of import output is 3% of that of export. 24 times, the research report shows that China's export of plastic products is dominated by daily necessities with low added value, meeting the general consumption demand of foreign countries. In terms of technical content, China's plastic processing industry still has a lot of room for development. In addition, we also face the same problem in the field of plastic machinery. The plastic processing equipment exported by China has low technical content and low economic added value. China's plastic machinery manufacturing enterprises should start from the scientific and technological content of the machinery itself to improve the quality and added value of products

the plastic industry has formed such a large profit deficit in many aspects, which makes the technological upgrading of China's plastic industry become the focus of work. The plastic industry should continue to thoroughly implement the scientific concept of development, take accelerating the transformation of economic growth mode as the main line, speed up structural adjustment, and comprehensively promote resource conservation, environmental protection, low-carbon and circular development; Comprehensively promote independent innovation in science and technology, vigorously implement brand strategy, patent strategy and standard strategy, and speed up the construction of industry integrity and society; Comprehensively improve the overall quality of the plastic industry, and accelerate the pace of advancing from a large plastic country to an advanced plastic processing country in the world, that is, from a large plastic country in China to a powerful plastic country. Just as required by the development outline of China's series of industries

from January to June, the cumulative total output of domestic plastic products was 2640. 740000 tons, with a year-on-year decrease of 7. 3 percentage points. In June, the domestic output of plastic products was 526. 770000 tons, with a year-on-year decrease of 14. 18 percentage points. The data analysis shows that the growth rate of China's plastic industry has slowed down significantly, the benefits have declined comprehensively, and the industry's losses have increased. The plastic industry has reached a critical stage of structural adjustment and mode transformation

the main development goals of the plastic processing industry in the 12th Five Year Plan are that the output of plastic products will increase by about 12% annually, the total industrial output value will increase by about 15% annually, the total profits and taxes will increase by about 18% annually, the import and export trade volume will increase by about 9% annually, and the output value rate of new products and the contribution rate of scientific and technological progress will be increased to 10% and 40% respectively

but the less optimistic data analysis in the first half of the year shows that plastic enterprises have a long way to go to achieve these goals

in general, technological upgrading under the background of product differentiation will become the key to the further development of the plastic industry in the future

Second, the plastic industry is facing deep adjustment

from January to June, the cumulative total output of domestic plastic products was 2640. 740000 tons, with a year-on-year decrease of 7. Key technologies for improving organizational quality. 3 percentage points. In June, the domestic output of plastic products was 526. 770000 tons, with a year-on-year decrease of 14. 18 percentage points. The data analysis shows that the growth rate of China's plastic industry has slowed down significantly, the benefits have declined comprehensively, and the industry's losses have increased. The plastic industry has reached a critical stage of structural adjustment and mode transformation

the main development goals of the "12th Five Year Plan" of plastic processing industry are that the output of plastic products will increase by about 12% annually, the total industrial output value will increase by about 15% annually, the total profits and taxes will increase by about 18% annually, the import and export trade volume will increase by about 9% annually, and the output value rate of new products and the contribution rate of scientific and technological progress will be increased to 10% and 40% respectively. However, the less optimistic data analysis in the first half of the year shows that plastic enterprises have a long way to go to achieve these goals. China's plastic industry is facing in-depth adjustment and will change from production capacity to added value. Therefore, we must grasp the following trends

the development of differentiated products is the key. Although the overall plastic market in China is relatively depressed, the growth rate of the market and production capacity of modified plastics is higher than you don't know? Ordinary plastic. For example, the trend of "replacing steel with plastic" in automotive and electronic products is obvious. Under the demand of automobile lightweight, in addition to the use of plastic in car outer plate, baffle and other parking parts, there is also a great demand for components such as fuel system to "replace steel with plastic", such as the application of modified nylon and carbon nanotubes as internal barrier layer. The household appliance industry is the major consumer of plastic in electronic products. The average consumption of household appliances such as color TVs and air conditioners is 1. 5～2。 5 kg. In electronic products, polycarbonate and polyetherimide materials reinforced by nanotubes have also become a trend in the application of computer hardware. Data analysis shows that the per capita consumption of steel and plastic in China is 600 kg and 50 kg respectively, and there is a lot of room for the development of "replacing steel with plastic"

compared with ordinary plastics, differentiated plastic products involved in these fields naturally have higher added value, which is the key to improving profits; As the production capacity of domestic automotive and electronic products has ranked first in the world, the demand space of "replacing steel with plastics" in these industries is larger than the export growth space of plastics

the standards for plastic products have become more stringent. In recent years, the European Union has continuously issued or implemented stricter environmental protection standards for chemicals, raising the export threshold of China's plastic products. For example, in February, 2011, the European Union directly included a variety of phthalates in the chemical phase out list; From July 20, 2011, the EU further began to implement the strictest new EU toy safety directive in history, significantly increasing the restrictions and prohibitions on phthalates and specific heavy metals. Therefore, the use of more environmentally friendly resins, fillers, additives and other development of more environmentally friendly plastic products has become the way for the differentiated development of export products in the domestic plastic industry. In addition to environmental factors, the improvement of other functions of products also puts forward high requirements for modification technology. For example, many countries require that the materials involved in electronic components products must have flame retardancy, of which nearly two-thirds of flame-retardant plastics are required to reach UL94V-0, about one-fifth of flame-retardant plastics are required to reach UL94V-2, and about one tenth of flame-retardant plastics are din4102b1

the development of bio based plastics has become a hot spot. In the development pattern of global bio based engineering plastics, according to the different market research industry background, it can be divided into three types of enterprises: the first type is the enterprises that were originally mainly engaged in the management of bio based raw materials, such as the polylactic acid developed by NatureWorks, a subsidiary of Cargill in the United States, which is a typical product; The second category is the enterprises that used to be mainly engaged in the development of petrochemical products, especially fine chemicals. For example, DSM, a Dutch chemical giant, used 70% castor oil-based materials to develop ecopaxx products, which can be used as thermoplastic materials in automobile hood; The third category is mainly manufacturers of downstream application development. For example, many Japanese enterprises import polylactic acid masterbatches from American companies to develop plastics for automobiles, electronic products and toys

however, the development of China's plastic industry in this regard is insufficient, and there is a large gap with international advanced enterprises, which is one of the future development directions of the domestic plastic industry

analysis of investment in the development of plastic products industry in 2012

I. Development of plastic industry in 2012

the state has issued a series of economic stimulus plans and ten industrial revitalization plans, which will stimulate the demand and consumption of plastic production and promote the development of plastic industry. The government has successively issued various measures to save the market, including investment projects of 4trillion yuan, and arranged and implemented ten measures to expand domestic demand. In particular, PVC plastic products will be applied to major projects such as accelerating the construction of affordable housing projects, accelerating the construction of rural infrastructure, accelerating the construction of major infrastructure such as railways, highways and airports, and accelerating the transformation of urban electricity. The automobile, electronic information, light industry and other industries that have issued and implemented the adjustment and revitalization plan are also large users and consumers of PVC series plastic products, which will promote the development of the plastic industry. (data source: National Bureau of Statistics)

II. Regional distribution of China's plastic products industry

the plastic industry has increased to varying degrees in all regions. Statistical data analysis shows that in the past, provinces with relatively weak plastic processing industry, such as Hunan, Hainan, Shanxi, Inner Mongolia and other places, had a large increase in the output of plastic products in 2012, with an increase of more than 50%, but the uneven regional distribution pattern has not changed much, with high energy consumption Low processing technology and labor-intensive products gradually flow to economically underdeveloped areas

the total plastic products in Guangdong, Zhejiang and Jiangsu provinces are 1221. 330000 tons, accounting for 55% of the total output of the country. 5%, Guangdong still accounts for 25% of the country, Zhejiang still accounts for 20%, and Jiangsu accounts for 10. 5%, slightly decreased, and the overall pattern has not changed; Shandong Province ranks fourth, accounting for 7%; The output of Hebei, Henan and Liaoning provinces accounted for 5% and 4% respectively. 7%、4。 5%, surpassing Fujian and following Shandong, ranking 5th, 6th and 7th; Fujian, Anhui and Shanghai respectively account for 3. 93%、3。 34%、2。 82%, ranking 8th, 9th and 10th. (data source: National Bureau of Statistics)

the regional characteristics of various products are very obvious, and the varieties of plastic products in each province have their own emphasis: the output of plastic rods and pipes, plastic packaging boxes and containers, daily-use plastic products and other plastic products in Guangdong Province ranks first in the country; The plastic film and plastic artificial leather in Zhejiang Province rank first in the country; The output of foamed plastics and plastic synthetic leather in Jiangsu Province ranks first in China; The output of plastic profiles in Liaoning Province continued to rank first in the country after 2010; Agricultural film and plastic woven products in Shandong Province rank first in the country

Zhongyan Puhua Industry Research Institute